Language: Angličtina Čínština ( Zjednodušený ) Němec Hindština Vietnamský Chorvatský Dánský Holandský Francouzština Japonský Korejský Finský Řečtina Islandský Indonéský Nepálský Polský Portugalština ( Brazílie) Portugalština ( Portugalsko) Quechua Rumunština Somali Španělský Švédský Tamil Turečtina Ukrajinský Urdu Uzbek Zulu
Spongebob Otto Robot 3D Model
3D Model Description:
SpongeBob Otto Robot
Hello 3D printing and robotics enthusiasts!
I am sharing with you the STL files for the SpongeBob SquarePants-themed Otto robot design. This project offers a fantastic experience for both SpongeBob fans and those interested in robotics projects. By combining SpongeBob’s adorable appearance with Otto robot’s fun functionality, you will have a creative hobby project.
File Contents
In this package, you will find the following STL files:
Main body.stl: The robot’s body
Body back.stl: The back cover of the body
Foot L.stl: Left foot
Foot R.stl: Right foot
Leg.stl: Leg (The right and left leg are identical. Print two.)
Upper part.stl: Arduino Nano – USB access cover
Printing Instructions
Material Selection: You can use common 3D printing materials such as PLA or ABS. PLA is recommended as it is environmentally friendly and easy to use.
Layer Height: A layer height of 0.2 mm provides sufficient detail while maintaining reasonable print times.
Infill Density: An infill density of 15%-20% ensures the parts are durable without consuming too much material.
Support Structures: Due to the complexity of some parts, support structures may be necessary.
Print Orientation: For a smooth surface quality, ensure proper orientation and use brims or rafts for good adhesion to the print bed.
Assembly Instructions
Cleaning the Parts: After the printing process is complete, carefully remove the support structures.
Body Assembly: Attach the feet to the legs first, then mount them to the body.
Electronic Components: Install the necessary electronic components correctly to make the Otto robot functional.
Sharing and Support
Have fun with this creative and enjoyable project!
3D Model Settings:
I used the following settings for this print
Material :PLA
Layer Heigh : 0,2mm
Infill density : 20%
First Layer Speed : 10mm/sec
Print Speed : 50mm/sec