Zen Beach 3D Model

Summer is also a time to rest and reflect, and not everyone can get close to a beach to let themselves fall on the sand and feel the sea. That is why I created this minimalist zen garden design set on the beach, to help you connect with yourself and nature through meditative practice.

I have taken care of the design to make it aesthetic and balanced as well as practical. It has several tools from which you can create different patterns and take care of your beach. A rake, a flattening tool, a sphere with a seagull footprint pattern and another with a shell pattern, as well as two rocks that you can connect to the sand. All these elements are organized in a base that is inserted underneath the beach to maintain simplicity and harmony.

The set is designed so that the pieces incorporate magnets of 20 mm in diameter and 3 mm high, this will enable the union of the spheres and rocks with the sand to create the zen beach that you like.

Zen Beach is my entry for the Summer Necessities Creativity Challenge organized by ELEGOO and ALL3D

Print each file to make up the set (you need a printer with a minimum bed size of 220 mm), use supports in the printing of the center piece (BEACH.stl) in the handles of the base (BASE.stl) and for the magnet holes of the rocks and balls. Although the latter you could print them without supports and place the magnet while printing.

I used a layer height of 0.15 mm and high infill for the tools and a layer height of 0.3 mm and 10% infill (to lighten it) for the center plate because of its size. For the base be sure to put enough contour lines for the handles to be strong.

I used ELEGOO dark blue filament.