Language: Engleski Kineski (pojednostavljeni) Njemački Hindski Vijetnamski češki Danski Nizozemski Francuski Japanski Korejski Finski Grčki Islandski Indonezijski Nepali Poljski Portugalski (Brazil) Portugalski (Portugal) Quechua Rumunjski Somalski španjolski švedski Tamil Turski Ukrajinski Urdski Uzbečki Zulu
Venice Italy 3D Miniature
3D Model Description:
This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5×7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.
3D Model Settings:
This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.
I highly recommend using Arachne walls when slicing this model! This might take considerably longer to slice depending on your computer’s hardware, but it often it includes smaller details & buildings that ‘Classic’ walls might omit.
Unfortunately MakerWorld’s verification process times out when I try to upload my print profile with Arachne walls enabled by default, so you’ll most likely need to change this setting yourself.
If slicing with Arachne walls causes issues or takes an extended period of time, try switching back to ‘Classic’ walls and reducing the line/extrusion width of outer walls (external perimeters) to around 0.4mm instead.
Try using a 0.2mm nozzle (0.08mm layer heights) for even finer detail!
