SPONGEBOB OTTO ROBOT

SpongeBob Otto Robot Hello 3D printing and robotics enthusiasts! I am sharing with you the STL files for the SpongeBob SquarePants-themed Otto robot design. This project offers a fantastic experience for both SpongeBob fans and those interested in robotics projects. By combining SpongeBob's adorable appearance with Otto robot's fun functionality, you will have a creative hobby project. File Contents In this package, you will find the following STL files: Main body.stl: The robot's body Body back.stl: The back cover of the body Foot L.stl: Left foot Foot R.stl: Right foot Leg.stl: Leg (The right and left leg are identical. Print two.) Upper part.stl: Arduino Nano - USB access cover

Printing Instructions

Material Selection: You can use common 3D printing materials such as PLA or ABS. PLA is recommended as it is environmentally friendly and easy to use. Layer Height: A layer height of 0.2 mm provides sufficient detail while maintaining reasonable print times. Infill Density: An infill density of 15%-20% ensures the parts are durable without consuming too much material. Support Structures: Due to the complexity of some parts, support structures may be necessary. Print Orientation: For a smooth surface quality, ensure proper orientation and use brims or rafts for good adhesion to the print bed.

Assembly Instructions

Cleaning the Parts: After the printing process is complete, carefully remove the support structures. Body Assembly: Attach the feet to the legs first, then mount them to the body. Electronic Components: Install the necessary electronic components correctly to make the Otto robot functional. Sharing and Support Have fun with this creative and enjoyable project!

I used the following settings for this print Material :PLA Layer Heigh : 0,2mm Infill density : 20% First Layer Speed : 10mm/sec Print Speed : 50mm/sec