Language: 英語 簡体中国語 ドイツ語 ヒンディー語 ベトナム語 クロアチア語 チェコ語 デンマーク語 オランダ語 フランス語 韓国語 フィンランド語 ギリシア語 アイスランド語 インドネシア語 ネパール語 ポーランド語 ポルトガル語（ブラジル） ポルトガル語 ケチュア語 ルーマニア語 ソマリ語 スペイン語 スウェーデン語 タミル語 トルコ語 ウクライナ語 ウルドゥー語 ウズベク語 ズールー語
Spongebob Otto Robot 3D Model
3D Model Description:
SpongeBob Otto Robot
Hello 3D printing and robotics enthusiasts!
I am sharing with you the STL files for the SpongeBob SquarePants-themed Otto robot design. This project offers a fantastic experience for both SpongeBob fans and those interested in robotics projects. By combining SpongeBob’s adorable appearance with Otto robot’s fun functionality, you will have a creative hobby project.
File Contents
In this package, you will find the following STL files:
Main body.stl: The robot’s body
Body back.stl: The back cover of the body
Foot L.stl: Left foot
Foot R.stl: Right foot
Leg.stl: Leg (The right and left leg are identical. Print two.)
Upper part.stl: Arduino Nano – USB access cover
Printing Instructions
Material Selection: You can use common 3D printing materials such as PLA or ABS. PLA is recommended as it is environmentally friendly and easy to use.
Layer Height: A layer height of 0.2 mm provides sufficient detail while maintaining reasonable print times.
Infill Density: An infill density of 15%-20% ensures the parts are durable without consuming too much material.
Support Structures: Due to the complexity of some parts, support structures may be necessary.
Print Orientation: For a smooth surface quality, ensure proper orientation and use brims or rafts for good adhesion to the print bed.
Assembly Instructions
Cleaning the Parts: After the printing process is complete, carefully remove the support structures.
Body Assembly: Attach the feet to the legs first, then mount them to the body.
Electronic Components: Install the necessary electronic components correctly to make the Otto robot functional.
Sharing and Support
Have fun with this creative and enjoyable project!
3D Model Settings:
I used the following settings for this print
Material :PLA
Layer Heigh : 0,2mm
Infill density : 20%
First Layer Speed : 10mm/sec
Print Speed : 50mm/sec
