Language: 영어 중국어 간체 독어 힌두어 베트남어 크로아시아어 체코슬로바키아어 덴마크어 화란어 불어 일어 핀란드어 그리스어 아이슬랜드어 인도네시아어 네팔어 폴란드어 브라질 포르투갈어 포르투갈 포르투갈어 케추아어 로마니아어 소말리아어 스페인어 스웨덴어 타밀어 터어키어 우크라이나어 우르두어 우즈베크어 줄루어
Articulated Seagull 3D Model
3D Model Description:
A cute articulated Seagull.
This model is: PRINT IN PLACE – NO SUPPORTS
You need to glue the beak to the body after your print is finished.
Testprints:
A1 Mini with a 0.4mm nozzle printed in multicolor at 100% – 60 % size
A1 Mini with a 0.4mm nozzle printed in single color at 100% size
Filaments used for multicolor testprint:
Bambu Lab PLA Matte Ivory White (body)
Bambu Lab PLA Matte Charcoal (wings and tail feathers)
Fillamentum PLA Melon Yellow (feet and beak)
Multicolor print recommendation:
White needs a lot of flushing to keep it clear on the print. I recommend placing as many copies as possible on the buildplate and additional “Filament purge” objects to minimize waste (check last picture for example).
This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission.
Happy printing!
3D Model Settings:
Recommended Main Settings:
Layer height: 0.16
Infill: 15 % Gyroid
Supports: No Supports needed
Build Plate Adhesion Type: Brim
Printing Temperature and Cooling: depends on filament
