Language: 영어 중국어 간체 독어 힌두어 베트남어 크로아시아어 체코슬로바키아어 덴마크어 화란어 불어 일어 핀란드어 그리스어 아이슬랜드어 인도네시아어 네팔어 폴란드어 브라질 포르투갈어 포르투갈 포르투갈어 케추아어 로마니아어 소말리아어 스페인어 스웨덴어 타밀어 터어키어 우크라이나어 우르두어 우즈베크어 줄루어
Venice Italy 3D Miniature
3D Model Description:
This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5×7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.
3D Model Settings:
This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.
I highly recommend using Arachne walls when slicing this model! This might take considerably longer to slice depending on your computer’s hardware, but it often it includes smaller details & buildings that ‘Classic’ walls might omit.
Unfortunately MakerWorld’s verification process times out when I try to upload my print profile with Arachne walls enabled by default, so you’ll most likely need to change this setting yourself.
If slicing with Arachne walls causes issues or takes an extended period of time, try switching back to ‘Classic’ walls and reducing the line/extrusion width of outer walls (external perimeters) to around 0.4mm instead.
Try using a 0.2mm nozzle (0.08mm layer heights) for even finer detail!
