Language: 英语 德语 印地语 越南语 克罗地亚语 捷克语 丹麦语 荷兰语 法语 日语 韩语 芬兰语 希腊语 冰岛语 印度尼西亚语 尼泊尔语 波兰语 葡萄牙语（巴西） 葡萄牙语（葡萄牙） 盖丘亚语 罗马尼亚语 索马里语 西班牙语 瑞典语 泰米尔语 土耳其语 乌克兰语 乌尔都语 乌兹别克语 祖鲁语
Articulated Seagull 3D Model
3D Model Description:
A cute articulated Seagull.
This model is: PRINT IN PLACE – NO SUPPORTS
You need to glue the beak to the body after your print is finished.
Testprints:
A1 Mini with a 0.4mm nozzle printed in multicolor at 100% – 60 % size
A1 Mini with a 0.4mm nozzle printed in single color at 100% size
Filaments used for multicolor testprint:
Bambu Lab PLA Matte Ivory White (body)
Bambu Lab PLA Matte Charcoal (wings and tail feathers)
Fillamentum PLA Melon Yellow (feet and beak)
Multicolor print recommendation:
White needs a lot of flushing to keep it clear on the print. I recommend placing as many copies as possible on the buildplate and additional “Filament purge” objects to minimize waste (check last picture for example).
This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission.
Happy printing!
3D Model Settings:
Recommended Main Settings:
Layer height: 0.16
Infill: 15 % Gyroid
Supports: No Supports needed
Build Plate Adhesion Type: Brim
Printing Temperature and Cooling: depends on filament
