Language: 英语 德语 印地语 越南语 克罗地亚语 捷克语 丹麦语 荷兰语 法语 日语 韩语 芬兰语 希腊语 冰岛语 印度尼西亚语 尼泊尔语 波兰语 葡萄牙语（巴西） 葡萄牙语（葡萄牙） 盖丘亚语 罗马尼亚语 索马里语 西班牙语 瑞典语 泰米尔语 土耳其语 乌克兰语 乌尔都语 乌兹别克语 祖鲁语
Venice Italy 3D Miniature
3D Model Description:
This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5×7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.
3D Model Settings:
This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.
I highly recommend using Arachne walls when slicing this model! This might take considerably longer to slice depending on your computer’s hardware, but it often it includes smaller details & buildings that ‘Classic’ walls might omit.
Unfortunately MakerWorld’s verification process times out when I try to upload my print profile with Arachne walls enabled by default, so you’ll most likely need to change this setting yourself.
If slicing with Arachne walls causes issues or takes an extended period of time, try switching back to ‘Classic’ walls and reducing the line/extrusion width of outer walls (external perimeters) to around 0.4mm instead.
Try using a 0.2mm nozzle (0.08mm layer heights) for even finer detail!
